The precise control of the glue output is an important guarantee for the consistency of the glue point. The technicians of Richeng Precision Instruments will introduce the control method of the glue output of the automatic glue dispenser:
1: First, you have to calculate the amount of glue that needs to be dispensed for each dispensing product;
The calculation method is to measure the volume of the glue of the product, and the size of the volume is the amount of glue dripped each time.
2: Control the glue output of the dispenser;
Only knowing that the amount of glue can not achieve the purpose of accurate dispensing, we also need to control the amount of glue of the dispenser, and the amount of glue within a certain period of time must be equal to the volume of the product where the glue is dispensed. If the set glue time is longer, the glue output will be larger.
3: Use a pneumatic dispenser;
If we use liquid glue, which has a certain degree of fluidity, then we recommend that you use a pneumatic dispenser because it has a suction function. After the first dispensing of glue, the pressure can prevent the glue from flowing out automatically. The phenomenon occurs, so that the accuracy of the amount of glue can be guaranteed.
4: Choose the corresponding valve body. According to your glue, our technical staff will provide you with the most professional introduction, and equip you with the most suitable dispensing valve to solve your worries!
1: First, you have to calculate the amount of glue that needs to be dispensed for each dispensing product;
The calculation method is to measure the volume of the glue of the product, and the size of the volume is the amount of glue dripped each time.
2: Control the glue output of the dispenser;
Only knowing that the amount of glue can not achieve the purpose of accurate dispensing, we also need to control the amount of glue of the dispenser, and the amount of glue within a certain period of time must be equal to the volume of the product where the glue is dispensed. If the set glue time is longer, the glue output will be larger.
3: Use a pneumatic dispenser;
If we use liquid glue, which has a certain degree of fluidity, then we recommend that you use a pneumatic dispenser because it has a suction function. After the first dispensing of glue, the pressure can prevent the glue from flowing out automatically. The phenomenon occurs, so that the accuracy of the amount of glue can be guaranteed.
4: Choose the corresponding valve body. According to your glue, our technical staff will provide you with the most professional introduction, and equip you with the most suitable dispensing valve to solve your worries!
Previous：How to ensure the dispensing accuracy of the automatic dispenser?
Next：Already the last article
